AGM80(DIN77H) 12v80Ah AGM stop start battery replace 6-qtf-80
  • AGM80(DIN77H) 12v80Ah AGM stop start battery replace 6-qtf-80
0
Watch and watch

AGM80(DIN77H) 12v80Ah AGM stop start battery replace 6-qtf-80

•Auto motive. •Stereo Systems. •Boats & RVs. •Hydraulic Lifts. •Winches. •On-board Electronics.

  • Specification
  • Positive 

    plate

    Negative 

    plate

    Container 

    Cover

    Safety 

    valve

    Terminal 

    Separator 

    Electrolyte 


    Pillar 

    seal

    Thick high Sn

    low Ca grid

    with special

    paste

    Balanced Pb-Ca

    grid for improved

    recombinati

    on efficiency

    Fire resistance

    ABS(UL94-V0

    optional)

    Flame

    Si-Rubber

    and aging

    resistance

    Female

    Copper

    Insert M8

    Advanced

    PVC /AGM

    separator for

    high pressure

    cell design

    Silicon Gel

    Two layers

    epoxy

    resin seal

    03

    Front Terminal battery Product List
    ModelDimensions (L,W,H,Total Height*mm)Max. Discharge Current(5s)Voltage(V)Capacity(Ah)Weight(kg)Terminal
    AGM80315*175*190*190800
    128024.5AP6.6




    Specifications
    General Features
    Rated Voltage
    12V

    ·With Start-Stop vehicles, the engine is

    switched off during short stops for instance

    at traffic lights in order to save fuel

    and to reduce CO2 emissions by 5-10%.

    ·Technology Focus:In response to CO2 reduction

    targets set by EU that require engine to be

    shut off instead of idling while the vehicle

    is stopped, nearly all vehicle manufacturers

    launch start-stop platforms in Europe automotive battery.

    ·Requirements:Battery is required to start engine

    more frequently and provide energy for device

    support while "stop" mode Battery is integrated

    within a sophisticated energy and battery management system

    ·Battery Technology:Advanced AGM technology for:

    super high power and cold cranking ampere;

    very good charging acceptance performance;

    much longer cycle life compared to normal

    flooded car batteries.

    Terminal
    AP
    Container Material
    Black PP
    Max. Discharge Current
    800A (5s)
    Internal Resistance(25ºC)
    Approx 6.6mΩ
    Operating Temp. RangeDischarge
    -40~60ºC (-4~140ºF)
    Charge
    -20~50ºC (14~122ºF)
    Storage
    -40~60ºC (-4~140ºF)
    Nominal Operating Temp.Range
    25±5ºC (77±5ºF )
    Hold-DownB13
    Cell layout

    0

    Standards
    Effect of temp. to Capacity40ºC (104ºF)
    103%

    ·Compliance with IEC 60896 standards,

    EU Battery Directive

    ·UL, CE Certified

    ·Manufactured in

    ISO45001,ISO 9001 and ISO 14001

    certified production facilities

    25ºC ( 77ºF)
    100%
    0ºC ( 32ºF)
    86%
    Self Discharge

    BP series batteries may be stored for up to 6 months
    at 25ºC(77ºF) and then a freshening charge is required.
    For higher temperatures the time interval will be shorter


     



    1111 22


    Positive 

    plate

    Negative 

    plate

    Container 

    Cover

    Safety 

    valve

    Terminal 

    Separator 

    Electrolyte 


    Pillar 

    seal

    Thick high Sn

    low Ca grid

    with special

    paste

    Balanced Pb-Ca

    grid for improved

    recombinati

    on efficiency

    Fire resistance

    ABS(UL94-V0

    optional)

    Flame

    Si-Rubber

    and aging

    resistance

    Female

    Copper

    Insert M8

    Advanced

    PVC /AGM

    separator for

    high pressure

    cell design

    Silicon Gel

    Two layers

    epoxy

    resin seal

    03

    Front Terminal battery Product List
    ModelDimensions (L,W,H,Total Height*mm)Max. Discharge Current(5s)Voltage(V)Capacity(Ah)Weight(kg)Terminal
    AGM80315*175*190*190800
    128024.5AP6.6




    Specifications
    General Features
    Rated Voltage
    12V

    ·With Start-Stop vehicles, the engine is

    switched off during short stops for instance

    at traffic lights in order to save fuel

    and to reduce CO2 emissions by 5-10%.

    ·Technology Focus:In response to CO2 reduction

    targets set by EU that require engine to be

    shut off instead of idling while the vehicle

    is stopped, nearly all vehicle manufacturers

    launch start-stop platforms in Europe automotive battery.

    ·Requirements:Battery is required to start engine

    more frequently and provide energy for device

    support while "stop" mode Battery is integrated

    within a sophisticated energy and battery management system

    ·Battery Technology:Advanced AGM technology for:

    super high power and cold cranking ampere;

    very good charging acceptance performance;

    much longer cycle life compared to normal

    flooded car batteries.

    Terminal
    AP
    Container Material
    Black PP
    Max. Discharge Current
    800A (5s)
    Internal Resistance(25ºC)
    Approx 6.6mΩ
    Operating Temp. RangeDischarge
    -40~60ºC (-4~140ºF)
    Charge
    -20~50ºC (14~122ºF)
    Storage
    -40~60ºC (-4~140ºF)
    Nominal Operating Temp.Range
    25±5ºC (77±5ºF )
    Hold-DownB13
    Cell layout

    0

    Standards
    Effect of temp. to Capacity40ºC (104ºF)
    103%

    ·Compliance with IEC 60896 standards,

    EU Battery Directive

    ·UL, CE Certified

    ·Manufactured in

    ISO45001,ISO 9001 and ISO 14001

    certified production facilities

    25ºC ( 77ºF)
    100%
    0ºC ( 32ºF)
    86%
    Self Discharge

    BP series batteries may be stored for up to 6 months
    at 25ºC(77ºF) and then a freshening charge is required.
    For higher temperatures the time interval will be shorter


     



    1111 22


描述
Welcome to leave message for us