•Auto motive. •Stereo Systems. •Boats & RVs. •Hydraulic Lifts. •Winches. •On-board Electronics.
Positive plate | Negative plate | Container Cover | Safety valve | Terminal
| Separator
| Electrolyte | Pillar seal |
Thick high Sn low Ca grid with special paste | Balanced Pb-Ca grid for improved recombinati on efficiency | Fire resistance ABS(UL94-V0 optional) | Flame Si-Rubber and aging resistance | Female Copper Insert M8 | Advanced PVC /AGM separator for high pressure cell design | Silicon Gel | Two layers epoxy resin seal |
Model | Dimensions (L,W,H,Total Height*mm) | Max. Discharge Current(5s) | Voltage(V) | Capacity(Ah) | Weight(kg) | Terminal | mΩ |
AGM90 | 353*175*190*190 | 850 | 12 | 90 | 27.0 | AP | 6.5 |
Specifications | General Features | ||
Rated Voltage | 12V | ·With Start-Stop vehicles, the engine is switched off during short stops for instance at traffic lights in order to save fuel and to reduce CO2 emissions by 5-10%. ·Technology Focus:In response to CO2 reduction targets set by EU that require engine to be shut off instead of idling while the vehicle is stopped, nearly all vehicle manufacturers launch start-stop platforms in Europe automotive battery. ·Requirements:Battery is required to start engine more frequently and provide energy for device support while "stop" mode Battery is integrated within a sophisticated energy and battery management system ·Battery Technology:Advanced AGM technology for: super high power and cold cranking ampere; very good charging acceptance performance; much longer cycle life compared to normal flooded car batteries. | |
Terminal | AP | ||
Container Material | Black PP | ||
Max. Discharge Current | 850A (5s) | ||
Internal Resistance(25ºC) | Approx 6.5mΩ | ||
Operating Temp. Range | Discharge | -40~60ºC (-4~140ºF) | |
Charge | -20~50ºC (14~122ºF) | ||
Storage | -40~60ºC (-4~140ºF) | ||
Nominal Operating Temp.Range | 25±5ºC (77±5ºF ) | ||
Hold-Down | B13 | ||
Cell layout | 0 | Standards | |
Effect of temp. to Capacity | 40ºC (104ºF) | 103% | ·Compliance with IEC 60896 standards, EU Battery Directive ·UL, CE Certified ·Manufactured in ISO45001,ISO 9001 and ISO 14001 certified production facilities |
25ºC ( 77ºF) | 100% | ||
0ºC ( 32ºF) | 86% | ||
Self Discharge | BP series batteries may be stored for up to 6 months |
Positive plate | Negative plate | Container Cover | Safety valve | Terminal
| Separator
| Electrolyte | Pillar seal |
Thick high Sn low Ca grid with special paste | Balanced Pb-Ca grid for improved recombinati on efficiency | Fire resistance ABS(UL94-V0 optional) | Flame Si-Rubber and aging resistance | Female Copper Insert M8 | Advanced PVC /AGM separator for high pressure cell design | Silicon Gel | Two layers epoxy resin seal |
Model | Dimensions (L,W,H,Total Height*mm) | Max. Discharge Current(5s) | Voltage(V) | Capacity(Ah) | Weight(kg) | Terminal | mΩ |
AGM90 | 353*175*190*190 | 850 | 12 | 90 | 27.0 | AP | 6.5 |
Specifications | General Features | ||
Rated Voltage | 12V | ·With Start-Stop vehicles, the engine is switched off during short stops for instance at traffic lights in order to save fuel and to reduce CO2 emissions by 5-10%. ·Technology Focus:In response to CO2 reduction targets set by EU that require engine to be shut off instead of idling while the vehicle is stopped, nearly all vehicle manufacturers launch start-stop platforms in Europe automotive battery. ·Requirements:Battery is required to start engine more frequently and provide energy for device support while "stop" mode Battery is integrated within a sophisticated energy and battery management system ·Battery Technology:Advanced AGM technology for: super high power and cold cranking ampere; very good charging acceptance performance; much longer cycle life compared to normal flooded car batteries. | |
Terminal | AP | ||
Container Material | Black PP | ||
Max. Discharge Current | 850A (5s) | ||
Internal Resistance(25ºC) | Approx 6.5mΩ | ||
Operating Temp. Range | Discharge | -40~60ºC (-4~140ºF) | |
Charge | -20~50ºC (14~122ºF) | ||
Storage | -40~60ºC (-4~140ºF) | ||
Nominal Operating Temp.Range | 25±5ºC (77±5ºF ) | ||
Hold-Down | B13 | ||
Cell layout | 0 | Standards | |
Effect of temp. to Capacity | 40ºC (104ºF) | 103% | ·Compliance with IEC 60896 standards, EU Battery Directive ·UL, CE Certified ·Manufactured in ISO45001,ISO 9001 and ISO 14001 certified production facilities |
25ºC ( 77ºF) | 100% | ||
0ºC ( 32ºF) | 86% | ||
Self Discharge | BP series batteries may be stored for up to 6 months |