31M-825 12V105AH BCI Dual-Purpose Marine Battery
Product Description
Model: 31M-825
BRAVA 31M-825 BCI Group 31M Dual Purpose AGM Battery, Starter & Deep Cycle Sealed Marine & RV Battery.
Voltage : 12v
Capacity : 105Ah
Size : 330*173*212*237mm
Weight : 30.6kg
Terminal : 12
Tags:
31M-825 Marine Battery CAR Battery 12v105ah Battery AGM Battery
31M-825 Physical Specification (mm)
|
Electrical Specification
Standard Terminal (mm)
|
31M-825 Discharge Characteristics
Wet Starter Dual Purpose AGM Battery BCI Standard Series
Model | Rated Voltage(V) | 20hr @1.75V/cell | RC (min) | CCA -18℃(A) | L(mm) +0/-2 | W(mm) +0/-2 | H(mm) +0/-3 | TH(mm) +0/-3 | Gross Weight(kg) | Cell layout | Terminal | Hold-Down | Handle |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
24M-550 | 12 | 79 | 150 | 550 | 260 | 168 | 208±2 | 233±2 | 23.0 | 1 | 12 | B0 | TS7 |
27M-580 | 12 | 92 | 175 | 580 | 306 | 168 | 208±2 | 233±2 | 27.0 | 1 | 12 | B0 | TS7 |
27M-700 | 12 | 92 | 200 | 800 | 306 | 168 | 208±2 | 231.5±2 | 28.5 | 1 | 12 | B0 | TS7 |
31M-720 | 12 | 105 | 200 | 720 | 330 | 173 | 212±2 | 235.5±2 | 29.8 | 1 | 12 | B0 | TS7 |
31M-825 | 12 | 105 | 200 | 825 | 330 | 173 | 212±2 | 235.5±2 | 30.6 | 1 | 12 | B0 | TS7 |
34M-800 | 12 | 62 | 125 | 800 | 275 | 171 | 200±2 | 235.5±2 | 21.6 | 1 | 12 | B0 | TS7 |
S34B20R | 12 | 27 | 47 | 270 | 197 | 128 | 227 | 227 | 10.5 | 1 | 12 | B0 | TS7 |
S46B24R | 12 | 45 | 68 | 325 | 238 | 128 | 227 | 227 | 13.5 | 1 | 12 | B0 | TS7 |
S55D23R | 12 | 50 | 85 | 550 | 220 | 170 | 225 | 225 | 15.1 | 1 | 12 | B0 | TS7 |
S65D26L | 12 | 68 | 125 | 400 | 257 | 171 | 227 | 227 | 17.3 | 1 | 12 | B0 | TS7 |
S75D31L | 12 | 80 | 125 | 510 | 304 | 171 | 227 | 227 | 20.7 | 1 | 12 | B0 | TS7 |
FAQ
1. 31M-825 AGM Battery for Marine & RV Application
- Up to twice the life of a standard flooded battery.
- A starting power at low state of charge and low temperature.
- Longer life in high temperature environments.
- Spill proof which allows it to be mounted anywhere.
- Maintenance free and vibration resistant.
- Faster recharge and more cycles.
2. How to extend the life of a SMF battery?
In order to increase the life of battery, it is necessary to monitor the battery performance constantly. Here are some tips to optimize the battery performance.
1. The SMF battery should be placed in well ventilated area to avoid high temperature environment. With each 10 degree rise in air temperature, the float life reduces to half. If the battery is installed in equipment, it is necessary to isolate it from heat generating components like transformer.
2. In order to prevent deep discharge, it is necessary to set the cut off voltage to 11.5 volts in 12 volt battery and 4.5 in 6 volt battery.
3. It is necessary to prevent no load battery drain. The additional components of the equipment such as sensors, displays and indicators consume power in the no load condition. So if the equipment is not provided with automatic charging, this power loss leads to deep discharge.4. Boost cum float charging is suitable for SMF battery. If the power failure is frequent, the battery should be charged immediately to acquire full charge before the next power failure.
5. If there is any problem such as low backup time, battery heating, low terminal voltage even after continuous charging develops, the battery should be attended immediately.
6. If the equipment is not using for long time, it should be charged once in every week. If the battery is allowed to charge and discharge frequently, its life can be extended to 3-5 years.
CAR Battery: | Automobile | | Truck | | Marine/RV | | Motorcycle |
Tags: CAR Batteries Truck Batteries Truck Batteries Wholesales Dual-Purpose Batteries AGM Batteries